Choosing the Right Flagpole

Our standard selection of external halyard flagpoles are available in mounted heights from 20 ft. to 80 ft. with a ground set foundation. Click here to browse our catalog listing of standard flagpoles. If you require options other than a standard flagpole please contact Sandra@ladylibertyflag.com

External Halyard Standard Flagpoles, Ground Set
Material: Alloy 6063-T6 aluminum tubing with uniform conical taper

Finish: Directional sanded satin ground or chose from six other powder coat paint or anodized finishes.

Finial: Gold anodized aluminum ball with flush seam.

Truck: Stationary, single, or double revolving with stainless steel bearings.

Halyard: One or Two #10 (5/16-dia.) braided polypropylene ropes each with two chrome plated bronze swivel snap hooks and covers per halyard.

Cleats: One or two 9″ cast aluminum.

Collar: Spun aluminum flash collar finished to match pole.

Foundation: Ground Set foundation — sleeve fabricated from 16-gauge galvanized corrugated steel tube with a 3/16-inch thick, steel base plate and support plate, 3/4-inch diameter x 18 inch long ground spike and steel centering wedges.

Custom Order Options
Foundations: Shoe Base foundation — Cast aluminum shoe base with four galvanized steel anchor bolts and galvanized steel hex nuts, washers and lock washers. Tilting shoe base available on flagpoles less than 30 ft.

Finishes: Choose from fourteen standard or custom powder paint colors or anodized finishes, or specify your own color. Architect’s Flagpole Specifier.

American Flagpole has accessories, including flags, for your flagpole.

Internal Halyard

Our standard selection of internal halyard flagpoles are available in mounted heights from 20 ft. to 80 ft. with a ground set foundation. Click here to browse our cable winch based pole, here for rope based v cleat or here for rope based cam cleat catalog listing of standard flagpoles. If you require options other than a standard flagpole contact Sandra@LadyLibertyFlag.com

Internal Halyard Standard Flagpoles, Ground Set
Material: Alloy 6063-T6 aluminum tubing with uniform conical taper.

Finish: Directional sanded satin ground or choose from six other powder coat paint or anodized finishes.

Truck: Single or double revolving with stainless steel bearing concealed inside a cylindrical hood.

Halyard: Stainless steel aircraft cable with two, chrome Plated, bronze swivel snap hooks, plastic covered counterweight and beaded sling.

Collar: Spun aluminum flash collar finished to match pole.

Foundation: Ground Set foundation — sleeve fabricated from 16-gauge galvanized corrugated steel tube with a 3/16-inch thick steel base plate and support plate, 3/4-inch diameter x 18 inches long ground spike and steel centering wedges.

Select one of the following as a standard option
Winch: A winch is provided inside the pole at 4′-6″ above ground level to raise and lower the flag by use of a removable hand crank. The winch contains an automatic brake system to permit locking of the flag in any position.

Cam Cleat: Manually operated cam cleat includes a flush-access door with cylinder lock and continuous piano hinge
Outrigger

Our standard selection of outrigger flagpoles are available in mounted heights from 8 ft. to 20 ft. with wall mount anchorage. Click here to browse our catalog listing of standard flagpoles. If you require options other than a standard flagpole contact Sandra@LadyLibertyFlag.com

Outrigger Standard Flagpoles, Single Stationary
Material: Alloy 6063-T6 aluminum tubing with uniform conical taper.

Finish: Directional sanded satin ground or chose from six other powder coat paint or anodized finishes.

Finial: Gold anodized aluminum ball with flush seam.

Truck: Single stationary cast aluminum.

Halyard: One #10 (5/16-dia.) braided polypropylene rope with two chrome plated bronze swivel snap hooks and covers.

Cleats: One 9-inch cast aluminum cleat.

Pulley: 3/8″ 16 NC eyebolt and fixed double pulley.

Wall Mount: 3/4-inch 10 NC x 18-inch long full threaded stainless steel stud bolt with 14-inch long SCH pipe sleeves (by others).

Custom order options
Material: Also available in stainless steel and bronze.

Finishes: Choose from fourteen standard or custom powder paint colors or anodized finishes, or specify your own color using Vertical Wall Mount

Vertical Wall Mount

Our standard selection of vertical wall mount flagpoles are available in mounted heights from 15 ft. to 35 ft. with a wide choice of mounting bracket options. Click here to browse our catalog listing of standard flagpoles. If you require options other than a standard flagpole contact Sandra@LadyLibertyFlag.com

External Halyard Standard Flagpoles, Ground Set
Material: Alloy 6063-T6 aluminum tubing with uniform conical taper.

Finish: Directional sanded satin ground or chose from six other powder coat paint or anodized finishes.

Finial: Gold anodized aluminum ball with flush seam.

Truck: Single revolving cast aluminum with metal sheave and stainless steel bearing.

Halyard: #10 (5/16-dia.) braided polypropylene rope with two chrome plated bronze swivel snap hooks.

Cleats: One 9 inch cast aluminum, attached with two 5/16-inch stainless steel screws.

Anchorage: 3/4-inch 10 NC x 18-inch long full threaded stainless steel stud bolt with 14-inch long 1 1/4-inch SCH pipe sleeves (by others).

Custom order options
Material: Also available in steel and bronze.

Finishes: Choose from fourteen standard or custom powder paint colors or anodized finishes, or specify your own color.

Roof Mount: Contact us about special mounting requirements Sandra@LadyLibertyFlag.com
Nautical, Single or Double Mast

Our standard selection of nautical flagpoles are available in mounted heights from 25 ft. to 80 ft., with yardarm length ranging from 8 ft. to 18′-9″, with a ground set foundation. Click here to see a catalog listing of standard flagpoles. If you require options other than a standard flagpole, specify your flagpole using our Architect’s Flagpole Specifier.

Nautical Standard Flagpoles, Ground Set

Material: Alloy 6063-T6 aluminum tubing with uniform conical taper.

Finish: Directional sanded satin ground or choose from six other powder coat paint or anodized finishes.

Finial: Gold anodized aluminum ball with flush seam.

Truck: Single or double revolving with stainless steel bearings. Eye hook mounted single pulleys on yard arm and/or gaff.

Halyard: Four or Five #10 (5/16-dia.) braided polypropylene ropes each with two chrome plated bronze swivel snap hooks and covers.

Cleats: Four or Five 9″ cast aluminum.

Collar: Spun aluminum flash collar finished to match pole.

Foundation: Ground Set foundation — sleeve fabricated from 16-gauge galvanized corrugated steel tube with a 3/16-inch thick steel base plate and support plate, 3/4-inch diameter x 18 inches long ground (lightning) spike and steel centering wedges.

Select one of the following as a standard option
Mast: Single or double mast.

Custom order options
Foundations: Shoe Base foundation — Cast aluminum shoe base with four galvanized steel anchor bolts and galvanized steel hex nuts, washers and lock washers.

Finishes: Choose from fourteen standard or custom powder paint colors or anodized finishes, or specify your own color.

Gaff: Gaff assembly available (yardarm and/or gaff assembly shipped as separate section).
Counter-Balanced

Our standard selection of counter balanced flagpoles are available in mounted heights from 30 ft. to 50 ft. with a concrete foundation. Click here to browse our catalog listing of standard flagpoles. If you require options other than a standard flagpole contact Sandra@LadyLibertyFlag.com

Counter Balanced Standard Flagpoles, Tilting
Material: Alloy 6063-T6 aluminum tubing with uniform conical taper. Counterweight box, base plate and support channels are made of steel.

Finish: Directional sanded satin ground. Counterweight box matches color of pole.

Finial: Gold anodized aluminum ball with flush seam.

Truck: Single or double metal sheave cast aluminum with stainless steel bearing.

Halyard: One or two #10 (5/16-dia.) braided polypropylene rope each with two chrome plated bronze swivel snap hooks.

Cleats: One or two 9 inch cast aluminum, each attached with two 5/16-inch stainless steel screws.

Foundation: Concrete — Steel base plate with four galvanized steel anchor bolts and galvanized steel hex nuts, washers and lock washers.

Custom order options
Finishes: Choose from fourteen standard or custom powder paint colors or anodized finishes, or specify your own color.

Option Discriptions

Option Discriptions

colors